For international buyers of IQF fruit, frozen vegetables, fruit purees and related products, the product is only as good as the cold chain that delivers it. A perfect specification can be ruined by a 2°C temperature excursion over a 12-hour window. A passing microbiological test on the lot Certificate of Analysis means little if the reefer unit failed mid-voyage and the temperature logger proves it.
This is the operational guide to how IBIC Group protects IQF quality from cold storage through to container loading, and what B2B buyers should request from any frozen-food supplier to verify their own cold-chain discipline.
Reading note: this post describes general cold-chain practice for IQF frozen food export. Operational specifics — container set point, transit time, and documentation — depend on the buyer, the destination market, and the contract in place.
Why Cold Chain Integrity Matters for IQF Products
IQF products are temperature-sensitive. The quality control plane that matters most is the one the buyer never sees:
- Temperature rise during storage — even brief deviations above the set point accelerate ice crystal growth and cell damage.
- Temperature rise during loading — pallets sitting outside the cold store during loading can warm at the surface, creating localised thaw/refreeze cycles.
- Container integrity — a reefer container with a failed genset or compromised seal is undetectable from the outside.
- Transit documentation — without continuous temperature logging, there is no record of what actually happened inside the container during ocean transit.
Buyers who take cold chain seriously ask for three things:
- Documented container pre-cooling — proof that the reefer was at the set point before loading.
- Continuous temperature logging — proof that the set point held during ocean transit.
- Standard documentation set — proof that the lot was approved and released.
Stage 1 — Cold Storage at the Facility
At IBIC Group’s Zifta, Gharbia facility, IQF product leaving the packaging line moves directly into temperature-controlled cold storage maintained at -18°C or below. The cold store is monitored continuously, with alarms for temperature deviations.
Cold-storage discipline at this stage includes:
- Continuous temperature monitoring of the cold store.
- Alarm thresholds for any deviation from the set point.
- Segregated zones for approved, hold, and rejected lots.
- Lot-level traceability — every pallet is coded to the production batch.
- FIFO / FEFO rotation — first-in-first-out or first-expiry-first-out to ensure product ships in the right order.
When the shipment is ready, the order-picking team builds the load per the buyer’s specification and packing list. Pallets are typically stretch-wrapped and labelled with the buyer reference, lot code, and net weight.
For the upstream process that produces the product that goes into cold storage, see How IQF Works.
Stage 2 — Container Pre-Cooling
The most important cold-chain step that buyers should verify is container pre-cooling. A reefer container arriving from the shipping line is typically not at the target temperature when it reaches the loading facility.
IBIC’s pre-cooling protocol:
- Container inspection — check the genset (refrigeration unit), the seals, the interior cleanliness, and any residual odours. A damaged or dirty container is rejected before pre-cooling begins.
- Pre-cooling set point — the container is set to -18°C or below (per buyer specification).
- Pre-cooling duration — the container is run empty at the set point for a defined period (typically 4–8 hours depending on container size, ambient temperature and initial container temperature) until the interior temperature has stabilised at the set point.
- Pre-cooling verification — the temperature logger or controller reading is recorded as proof that pre-cooling was completed before any product is loaded.
- Documentation — the pre-cooling record is retained and can be shared with the buyer on request.
Why pre-cooling matters: loading IQF product into a container that is not yet at the set point causes a temperature rise in the first hours of transit. Even if the genset then holds the set point, the initial deviation can affect surface-layer cells and packaging integrity at destination.
Stage 3 — Container Loading
Loading is the cold-chain step where mistakes happen most often. IBIC’s loading protocol is designed to minimise product exposure to ambient temperature.
3.1 Loading Environment
- Loading bay is temperature-controlled or sheltered where possible.
- Loading time is kept short — pallets are staged inside the cold store and moved directly into the pre-cooled container.
- Door open time is minimised — the container door is opened only as needed and the genset continues running during loading.
3.2 Loading Pattern
- Pallet placement per the buyer’s specification (number of pallets, pallet pattern, dunnage).
- Air circulation — pallets are loaded to allow cold air to circulate around them inside the reefer. Block-stacking that blocks airflow is avoided.
- Dunnage and bracing — pallets are braced to prevent load shift during ocean transit.
- Tare and gross weight — the empty container weight is recorded before loading; the loaded weight is recorded after loading. Net weight is calculated and reconciled to the packing list.
3.3 Temperature Loggers
A temperature data logger is placed inside the container during loading. The logger is typically:
- Positioned to record the warmest point in the load (often near the door).
- Set to record at a defined interval (commonly every 15 or 30 minutes).
- Calibrated and validated per the manufacturer’s specification.
A second independent logger is sometimes added for high-value shipments.
3.4 Container Sealing
After loading, the container is sealed. The seal number is recorded on the shipping documents. A broken or replaced seal at destination is a red flag for cold-chain compromise.
Stage 4 — Temperature Monitoring During Transit
Once the reefer container is sealed and the genset is running, the cold chain is in transit mode.
4.1 On-Site Monitoring
- The container is plugged into a reefer point at the loading facility and at the port terminal to maintain power to the genset during storage.
- Continuous temperature monitoring through the reefer’s controller and the data logger.
4.2 Vessel Transit
- The container is loaded onto the vessel in a reefer bay (where available) with continued power.
- Transit time depends on the destination (e.g. days to Europe, longer to North America or the Far East).
- The reefer genset runs continuously during transit.
4.3 Cold-Chain Verification at Destination
- Temperature logger readout — the data logger is removed at destination and the temperature record is shared with the buyer. This is the single most important document for cold-chain verification.
- Container inspection — the seal is checked, the interior is inspected for any signs of thaw/refreeze (e.g. ice on the floor), and product temperature is verified at unloading.
Best practice: buyers should always retrieve the data logger at destination and confirm that the temperature record shows no excursions above the agreed set point. A clean logger record is the strongest evidence that the cold chain held.
Stage 5 — Documentation Set
Each IQF shipment is supported by a standard documentation set. The exact list depends on the destination market and the buyer’s contract, but a typical set includes:
- Commercial invoice — buyer, seller, product, quantity, unit price, total value.
- Packing list — pallet-by-pallet breakdown with weights and product codes.
- Bill of Lading (BL) — issued by the shipping line; includes container number, seal number, port of loading, port of discharge.
- Certificate of Origin — issued by the relevant authority in Egypt.
- Phytosanitary certificate — required by many destination markets for plant-origin products.
- Health certificate — required by some destinations.
- Certificate of Analysis (COA) — issued per production lot, with the analytical results for the shipped lot.
- Insurance certificate — where the contract includes marine cargo insurance.
- Container pre-cooling record — proof that the container was pre-cooled before loading.
- Temperature logger readout — provided at destination.
For buyers, the documentation set is the audit trail. If any document is missing or inconsistent, it is a red flag.
Stage 6 — Port and Vessel Handling
Between the loading facility and the destination, the reefer container passes through several handling steps. Each step is a potential cold-chain risk if not managed correctly.
6.1 Inland Transport
- Trucking from the loading facility to the port terminal.
- Genset continues to run during inland transport.
- Trucking time is logged.
6.2 Terminal Handling
- At the port, the container is plugged into a reefer point at the terminal to maintain power to the genset.
- Some terminals offer remote temperature monitoring that flags any deviation.
- Terminal storage time is minimised to reduce handling risk.
6.3 Vessel Loading
- The container is loaded onto the vessel under the shipping line’s documented procedure.
- During vessel transit, the genset continues to run, supported by the vessel’s power.
- Some vessels offer remote container monitoring — useful for high-value or sensitive shipments.
Stage 7 — Destination Handover
At destination, the buyer (or nominated 3PL) takes possession of the container. The handover typically includes:
- Seal verification — the original seal number is verified against the shipping documents.
- Container condition inspection — interior cleanliness, any signs of damage, any signs of thaw/refreeze.
- Product temperature check — at least one product probe reading at the warmest point.
- Data logger retrieval — the logger is removed and the temperature record is read.
- Documentation handover — original BL, commercial invoice, packing list, certificates.
A clean handover record is the strongest evidence that the cold chain held throughout the journey.
Common Cold-Chain Risks and How to Mitigate Them
Below are the most common cold-chain failure modes in IQF export, and how a disciplined supplier and buyer can mitigate them.
| Risk | Mitigation |
|---|---|
| Container not pre-cooled before loading | Documented pre-cooling record; verification before loading starts |
| Genset failure during transit | Data logger readout at destination; shipping line reefer monitoring; insurance |
| Seal break at destination | Original seal number recorded on BL; buyer inspection at handover |
| Temperature excursion during loading | Minimise loading time; loading bay shelter; genset running during loading |
| Transit delay at port | Pre-cooled reefer point at terminal; documented transit-time buffer |
| Improper product temperature at destination | Probe reading at handover; logger readout as backup evidence |
| Documentation missing or inconsistent | Documentation checklist pre-shipment; buyer audit of documents on receipt |
What B2B Buyers Should Request from Their Supplier
A practical cold-chain checklist for B2B buyers:
- Pre-cooling record — proof that the container was pre-cooled to the set point before loading.
- Loading protocol — documented procedure for loading time, dunnage, and genset running.
- Temperature logger placement — confirmed position and interval.
- Standard documentation set — confirmed pre-shipment.
- Seal number — recorded on the BL; verified at destination.
- Data logger readout at destination — reviewed and signed off by the buyer.
- Cold-chain KPI reporting — periodic review of any excursions across shipments.
- Audit access — facility tour to see the loading operation firsthand.
- Continuous improvement — corrective action if a deviation is identified.
For the broader QA framework that supports cold-chain integrity, see Quality Control in IQF Manufacturing.
How Cold Chain Ties to the Broader IBIC Quality System
Cold chain is one part of IBIC’s broader quality system. The other parts — IQF processing, packaging, pre-shipment inspection, and documentation — all support the same outcome: that the product the buyer receives matches the product the QA team released.
The flow is:
- How IQF Works — the upstream process that produces the product.
- Packaging and metal detection — the QA gates that release the product for export.
- Cold storage and pre-shipment inspection — the holding and final verification steps.
- Container pre-cooling, loading, and transit — the cold chain that delivers the product.
- Documentation set — the audit trail that proves every step above.
Each piece is a link in the chain. A weakness in any link is a weakness in the whole programme.
Certifications & Documentation
IBIC Group’s credentials, with the exact wording from our certification documents, are:
Certification coverage varies by product, activity, supplying entity and production site. The credentials below should be read alongside their applicable scopes. Please request the documentation relevant to your proposed order.
- ISO 9001:2015 — Quality Management Systems.
- ISO 22000:2018 — Food Safety Management Systems.
- FSSC 22000 — Food Safety System.
- GLOBALG.A.P. — Good Agricultural Practices (sourcing).
- GLOBALG.A.P. GRASP — Social Practice Assessment (sourcing).
- U.S. FDA Food Facility Registration.
- Kosher — Religious Dietary Compliance (held for selected Belevini juices; coverage for specific IQF SKUs is confirmed per inquiry).
For cold-chain and logistics documentation, request the COO, BL, COA, phytosanitary certificate (where required), health certificate (where required), and the temperature logger readout from each shipment. For cold-chain audit access, request a virtual or physical tour of the loading operation.
How to Audit IBIC’s Cold Chain
Qualified buyers are welcome to tour the IQF facility and the loading operation in Zifta, Gharbia. A cold-chain audit typically includes:
- Cold store walk-through — temperature monitoring, alarm thresholds, segregation zones.
- Container inspection — review of the pre-cooling record from a recent shipment.
- Loading observation — review of a live or recorded container loading operation.
- Documentation review — sample of recent BL, COA, COO, phytosanitary certificate.
- Data logger review — sample of a recent temperature logger readout.
- Corrective action log — review of any cold-chain incidents and how they were handled.
Virtual tours can be arranged for international partners who cannot travel.
Frequently Asked Questions
Answers to the questions buyers ask most about the IQF cold chain and reefer shipping.
What is the cold chain in IQF export?
The cold chain is the unbroken sequence of temperature-managed handling that keeps IQF product at -18°C or below from processing through to the buyer’s destination. It includes cold storage, container pre-cooling, loading, transit, port handling and destination handover.
Why is container pre-cooling important?
Loading IQF product into a reefer container that is not yet at the set point causes a temperature rise in the first hours of transit. Even if the genset then holds the set point, the initial deviation can affect surface-layer cells and packaging integrity at destination. Pre-cooling the container to the set point before loading eliminates this risk.
What temperature should IQF product be held at?
IBIC holds IQF product at -18°C or below in cold storage and during transit. The exact set point depends on the buyer specification and the destination market’s regulatory requirements.
What is a reefer container?
A reefer container is a refrigerated shipping container with an integral diesel or electric refrigeration unit (the “genset”) that maintains a set temperature inside the container during transit. Reefer containers are the standard format for shipping IQF product internationally.
How long does a reefer container take to pre-cool?
Typical pre-cooling duration is 4–8 hours, depending on container size, ambient temperature and the initial container temperature. The IBIC pre-cooling protocol records the duration and the final container interior temperature before loading begins.
What is a temperature data logger?
A temperature data logger is a small electronic device placed inside the reefer container during loading. It records the temperature at a defined interval (commonly every 15 or 30 minutes) for the duration of transit. The data logger is retrieved at destination and the temperature record is shared with the buyer.
Where should the temperature data logger be placed?
The IBIC protocol is to position the logger to record the warmest point in the load — typically near the container door. A second independent logger is sometimes added for high-value shipments.
What documentation is supplied with each IQF shipment?
Each IQF shipment is supplied with a commercial invoice, packing list, bill of lading, certificate of origin, phytosanitary certificate (where required), health certificate (where required), certificate of analysis (COA) per lot, and the container pre-cooling record. The temperature logger readout is provided at destination.
What is the difference between the container genset and the reefer point?
The genset is the refrigeration unit fitted to the reefer container itself — it runs on diesel or electricity during transit. The reefer point is the electrical supply at a terminal or loading facility that powers the genset while the container is parked — keeping the refrigeration running during storage.
What should a buyer check at destination handover?
At destination, the buyer should check the seal number against the BL, the container condition (interior cleanliness, any signs of thaw/refreeze), the product temperature (at least one probe reading), and the data logger readout. A clean handover record is the strongest evidence that the cold chain held.
How does cold chain integrate with the broader QA system?
Cold chain is one link in the broader QA chain that includes IQF processing, packaging, pre-shipment inspection and documentation. A weakness in any link is a weakness in the whole programme. For the broader QA framework, see Quality Control in IQF Manufacturing.
Can I audit IBIC’s cold chain operation?
Yes. Qualified buyers are welcome to tour the IQF facility and the loading operation in Zifta, Gharbia. A cold-chain audit typically includes a cold store walk-through, container inspection, loading observation, documentation review, data logger review, and corrective action log review. Virtual tours are available for international partners.
Does IBIC Group operate its own shipping line or freight forwarding?
No. IBIC Group coordinates with established shipping lines and freight forwarders experienced in frozen-food logistics. Container booking, vessel selection and freight forwarding are managed by IBIC’s export team in coordination with the buyer’s nominated forwarder (where applicable).
Tour IBIC’s Cold Chain
If you are evaluating an IQF supplier, the cold chain is one of the operations you need to see. IBIC Group’s export team is ready to host a virtual or physical audit of the cold store, container pre-cooling, loading operation, and documentation flow.
About the author
This article was prepared by the IBIC Group Editorial Team and reviewed by the IBIC Logistics & Quality Assurance Departments. IBIC Group is an Egyptian food manufacturer and exporter of IQF frozen fruits, frozen vegetables, fruit purees, canned foods, grilled vegetables, and juice products, operating from the Nile Delta since 2015.

